Mon, 9 December 2019
This Podcast is brought to you by these Rad Ass Companies
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy & GMC Truck Parts.
www.PSIconversion.com/c10talk - When you are looking to upgrade to an LS or LT based motors - PSI Conversion is your One Stop Shop!
www.vintageair.com - Whether your truck came with AC or Not, Vintage Air has a kit for you.
www.classicperform.com - Use code "C10 Talk" at check our and save 10 % off your entire order.
Rtech Fab, aka Randall Robertson the man behind Rtech Fabrication stops by the MagnaFlow Podcast booth and we jam out some podcast. Randall and his team are the guys behind such trucks as the Duke, The Ponderosa, and the K50 Blazer "Bull Dog". Randall assures me that he has some big plans and big trucks planned for the near future. So jump in , hold on and let's take a ride with Randall.
Tue, 3 December 2019
Thanks a ton for sitting down with my Joey.
This episode is brought to you by these Rad Ass Chevy/GMC Truck vendors.
www.accuair.com - Have you seen their new e+ CONNECT?
www.prp.cpm - Seal your build right, demand quality, demand precision!
www.mar-k.com - When you want the best for your truck, choose Mar-K.
www.dakotadigital.com - Upgrade your trucks interior!
Joey Gonzales from San Manual, Arizona - a small mining town just North of Tucson was raised learning the value of hard work and taking care of your possessions. Treating people the way you'd want to be treated.
"Joey G" has proven that these values taught to him by his Grandparents, are instilled and part of the thread that makes up the man.
Joey's passion for Chevy trucks started early and he has't turned back since that same Grandfather gave him his first truck, an 1989 OBS.
We are glad he hasn't and we look forward to what comes next from Joey and the Bitchin' Crew.
Tue, 26 November 2019
I was fortunate enough to be able to sit down with Rich Downing (Program Manager/Engineer, Special Show Vehicles and Pace Cars) and Mr. Russ O'Blenes (Director, Performance and Racing - Propulsion Team) From General Motors while at was at SEMA - 2019.
Man these guys are easy as cool as their job titles - No BS, Rad Dudes, just like us. They like Cars and Trucks (C10's) no different then most, they just get to work for GM and build really rad stuff there too.
I bet it can be stressful, but these COOL Kats made it happen, they delivered the first E10 to SEMA - 2019.
Its ironic that Tesla teased the world with their Tesla CyberTruck this week as well. It reminds me of the 80's arms race, just a lot cooler and peaceful, OK bad example, but cool shit is happening and these big players are making it happen.
Episode #157 is brought to you by -
www.classicperform.com - Use Code "C10 Talk" at check out to save 10 percent off your order.
www.azproperformance.com - Save big this week for "Black Friday" on Bear Brakes, Dakota Digital, Boyd Welding Tanks, Idiot columns, and so much more.
www.brotherstrucks.com - C10 Talk MVP's use code "BLKF19" to gain access to Brothers Trucks website and SAVE big, and SAVE early. you can gain access before everyone else.
Enter Code "BLKF19" at check out and watch your price change before your eyes.
www.psiconversion.com - If you are looking to upgrade that powertrain - PSI has you covered. "Wire it and Fire it"
PSI is your LS motor conversion specialist, and you can save this FRIDAY - Save 10% by using code "C10 TALK" at check out - you will save 10% off orders $500- 1499, and 15% off anything over $1500 - DAMN SON!!
www.accuair.com - They are offering their OG eLevel package for $945 - that elevel, wiring, ride height sensors, and touch pad. AccuAir under a Grand - Damn Son!! Check out their website and their new KILLER e+CONNECT package as well. It was debuted at SEMA and now they are taking orders now!!
www.c10nation.com - HELL YA we are having a sale too. You want rad gear - we got you. Its COLD out, we have hoodies, beenies, long sleeves, and so much more - entire site is 20-50% off, no code needed. From Wednesday to Monday, we got you.
Can you imagine 5 years buying a eCrate motor for your C10, well its going to happen, so get ready.
Happy Thanksgiving C10 Nation, I truly hope you have a blessed week/weekend and the safest of travel.
HUGE thanks to MagnaFlow for giving us podcasters the real estate at SEMA, Shout Engine for scheduling it all, and Russ and Rich for taking the time out of your SEMA schedule to sit down with the C10 Nation.
Please remember to share the pod, rate and review too! Ronnie
Tue, 19 November 2019
Episode #156 is brought to you by these Rad Ass Sponsors.
www.classicperform.com - Save 10% off your total order when you use code "C10 Talk" at check out. Yep - new brakes, new tanks, new whatever - save 10%
www.dakotadigital.com - Upgrade that interior - choose VHX, HDX, or the Retro style RTX. Either way your truck will love you for it!
www.azproperformance.com - When you want to upgrade from stock, matched with the BEST customer service - Call Travis and Nick.
www.vintageair.com - Wether your truck has stock AC or not - its time to upgrade to a new more efficient system, Vintage Air has a system for you.
Holy Crap what a great weekend!! The Git Down did not disappoint AT ALL!
Over 1500 amazing HIGH QUALITY builds.
If you're not making new friends at the Git Down, its because you're not here!
That sums it ALL up it was an awesome fun filled weekend!
Thanks Dino and Crew for all of your hard work and efforts. Krysta - amazing job. Seth - Damn Son that was fun.
The trucks are cool, but YOU the PEOPLE are cooler!!
Wed, 13 November 2019
Episode #155 is brought to you by these Rad Ass Sponsors.
www.accuair.com - The Leader in aftermarket Air Management, ACCUAIR!
www.classicperform.com - Use "C10 Talk" at check out and save 10% off your entire order.
www.prp.com - Precision Replacement Parts, ask for PRP at your favorite parts dealer and "Seal Your Build Right!"
Mar-k.com - When you want the best Bed Wood, Side Molding and so much more - you want Mar-K. Made in America.
SEMA 2019 did not disappoint. So many rad builds, and builders.
The Journey for some of these builders has been well over two years. A journey that at times, had them not finishing. Not knowing if they would have a spot for their build. So many up's and down's and they prevailed.
Congrats to all of those that made it.
Dino also joins me on this episode as we talk all things 2019 Git Down. Rules, Parking layout and the weekends activities.
Good Times ahead! Drive safe KATS!!
Fri, 1 November 2019
Tue, 29 October 2019
Episode #153 is brought to you by
www.brotherstrucks.com Your number one source for 1947-87 Chevy and GMC truck parts.
www.dakotadigital.com - Old School look, New school performance.
www.PRP.com - Ask for Precision Replacement Parts at your favorite parts dealer and "Seal Your Build Right"!
www.mar-k.com - Trim, bed wood, and more - Made in the USA!
When this first came out, most thought it was a scam as it was "too good to be true'! Well when some of the bigger players in the Automotive scene started saying that they were going and some were sending cars and trucks to be sold - people started to listen.
$10K just to send your rig, whether it sells or not - Damn Son!!
450 spots filler later and 250 vendor later and there will be a World Class auction in Riyadh, Saudi Arabia this November.
I really wanted to know more about it and thought what the hell, let's share this with the C10 Nation. Thanks Gary and Boris, Ronnie
Thu, 24 October 2019
Episode #152 is brought to you by these Rad Ass Chevy Truck Sponsors.
www.accuair.com - The best in automotive air management and performance. AccuAir!
www.classicperform.com - Use "C10 Talk' at check out and save 10% off your entire order.
www.VintageAir.com - When your AC system needs to be brought back to life. Vintage Air!
www.azproperformance.com - When you're ready to upgrade from stock.
Stylin Concepts was founded by Mr and Mrs Gary Case in 1987, and from there they didn't look back, because they couldn't - they were so damn busy slingin them parts.
Gary attributes his vision and "stylin" from his Street Rod days.
The company was a huge success, making all era's of American Trucks look great and stylish.
The trucks were so stylish that they needed a truck show to showcase these rad ass trucks and all the "Stylin Concepts" parts. So Gary started the Sport Truck Nationals, during the 4th of July weekend every year.
The show like his company was a hit!
Thanks Gary and Boris for the kick ass class in OBS history's past!
Wed, 16 October 2019
Episode #151 is brought to you but these Rad Ass companies - please support those that support you.
www.psiconversion.com/c10talk When you are converting to an LS/LT based motor and need the best wiring harness - choose PSI.
www.classicperform.com - CPP - Use code "C10 Talk" to save 10% off your entire order - DAMN SON, 10%!
www.azproperformance.com - When you are ready to upgrade from stock, Pro Performance has what you need and the customer service to back it up!
www.dakotadigital.com - The best in aftermarket gauge clusters. VHX, HDX, and the new RTX!! They have all C10 Era's and OBS trucks covered.
Get You Some Of That C10 Nation!!!
I sit down and chat it up with Mr. Gas Monkey himself, Richard Rawlings.
Love him or hate him, we have a great time and I feel he has a great story to tell. We crack some Barley Pop's and talk all things, Gas Monkey Garage, the past, and the future. He is an energetic entertaining MoFo, who is always down for two things - a good time and a good hustle.
So many topics hit - The car he would love to have, the car he won't sell, Saudi Arabia auction, ex wives, new wives, bosses, and Discovery..
Tune in, grab a cold one and enjoy.
Please remember to subscribe to the podcast where ever you tune in, leave a review and share it with a friend. Thanks for tuning in - Ronnie.
Tue, 8 October 2019
Episode #150 is brought to you by these Rad Ass C10 Sponsors.
www.brotherstrucks.com - Your #1 Source for all of your 1947-87 Chevy and GMC Truck parts - Brothers Trucks!
www.accuair.com - The leader in aftermarket automotive air management and the creators of the ENDO system - ACCUAIR!
www.classicperform.com - Use "C10 Talk" at checkout and save - 10% off your entire order, 10% - Damn Son!
www.prp.com - When you expect the best, seal your build right - Precision Replacement Parts, ask for it at your favorite parts dealer.
Great time as ALWAYS - this is truly one of the best shows in our scene. Add it to your list for 2020.
Thanks to all that took time to do interviews with me and of course all the staff and crew that puts on this amazing C10 show!
Tue, 1 October 2019
Episode #149 is brought to you by these Rad Ass C10 Sponsors. Remember - Support those that support you!
www.classicperform.com - Use code "C10 Talk" at check out and save 10% off your entire order, DAMN SON! 10%!!
www.dakotadigital.com - Upgrade that interior, VHX, HDX, and RTX! These gauges are the BEST!
www.azproperfromance.com - When you are ready to upgrade from STOCK, think Pro Performance.
www.psiconversion.com/c10talk - When you are doing an LS conversion - make one call, that's all - PSI Conversion and let them know C10 Talk sent you over - you'' get free shipping on any order over $250.
Damn Son - We got #OrangeSlice done, Grinder was able to capture the journey and we made it. Check out the coverage of the 2nd Annual C10 Intervention from Auburn, CA.
Great times - ahead.
Tue, 24 September 2019
I just found out about Cody's situation and wanted to help. Cody is a 20 year old who has fought cancer twice in the last 3 years. He also loves C10 Trucks and has one that he is trying to get finished before he turns 21. With the help of so many great companies like GSI, Accuair, Budnick Wheels, Black Widow exhaust, CPP, Nitto Tire, and many more - the truck is well on his way and he is on the home stretch along with the help of the Make-a-Wish foundation.
There's a catch, he would like to get it done before he turns 21, Nov 15th. Which is also the day of the infamous Git Down.
Our goal is to help Cody, and the Make-A-Wish foundation to complete the truck so Cody can have it done before Nov 15th and if he wants, he can bring it to the 9th annual Git Down in Phoenix, Arizona.
Fri, 6 September 2019
This episode is brought to you by these RAD ASS Sponsors -
www.classicperform.com - Use "C10 Talk" at check out and save 10%, yep - 10% for mentioning C10 Talk, Damn Son!
www.accuair.com - The leader in Air Management and the creators of the ENDO system.
www.Mar-K.com - More then just side molding, bed wood and so much more.
www.dakotadigital.com - VHX, HDX, and the new RTX - When you're ready to upgrade your interior, think Dakota Digital.
Solomon Lunger has a vast back ground for being in his mid-20's. Last month he was the photographer behind all three covers on the C10 Builders Guide, Street Trucks, and F100 Builders Guide. Amazing!
Solomon didn't start out shooting trucks, he actually went to WyoTech and was into Fabrication and building Hot Rods. One thing led to another and now he is a well published photographer in our scene, and runs a few very success Ford social media sites. F100 Era, and UnibodyUnion.
We talk about his new job in California, working for Provost Motor Sports, and leaving Florida. The difference between East Coast and West Coast Truck scene and of course we talk Chevy vs. Ford.
Solomon is a humble hard worker and I think we will be seeing a lot more of him in the future.
Thanks for stopping by Solomon, and remember - "Suck It Solomon!"
Tue, 27 August 2019
Episode #147 is brought to you by these Rad Ass Companies -
www.vintageair.com - Is it time to add or update your trucks AC system. Vintage has a kit for you.
www.PRP.com - Seal your build right. Time to change out that old cracked, brittle weatherstripping - ask for Precision Replacement Parts.
www.brotherstrucks.com - Your source for 1947-87 Chevy and GMC restoration parts.
www.azproperformance.com - Your source for all of your 1988-98 OBS needs - hit up the fellas at Pro Performance.
Mark Oja - Has been in the automotive scene since he was a young man in Canada.
He had dreams of working in the states, and Boyd Coddington. Then a few years later Mark found himself painting cars for Chip Foose, on Overhaulin.
Mark has been building rad 88-98 trucks for over 30 years, we are stoked to have Mark on the Podcast and talk to him about the uprise of the 88-98 trucks. Mark has some killer things in the works so make sure and give him a follow.
Tue, 13 August 2019
Episode #146 is brought to you by these Rad Ass C10 Sponsors, remember to support those that support the show.
www.psiconversion.com/c10talk - Your LS conversion specialist. Use C10 Talk and get FREE shipping and a Rad T-Shirt!
www.dakotadigital.com - Upgrade those old gauges. Dakota has guages that look stock but deliver modern technology.
www.classicperform.com - When your ready to upgrade your brakes, your stance, and your STOPPING! Use C10 Talk at checkout and save 10 % off your total order. Damn Son!
www.accuair.com Your leader in Automotive Air Management and creators of the ENDO system. AccuAir!
@cougar1967 decided to create @c10sales and it's easily one of the fastest moving C10 instagram accounts out there.
If you're selling a C10 or looking to buy one - you need to be following @c10sales.
Cougar explains why he likes C10's so much and how he got into them. He lets us know what seems to work the best and how to sell your truck.
He has some good stories as well - a few over priced trucks that he refused to put on his page, and the short bed that was more like a shit bed! #sorrynotsorry.
Even if you're not currently buying or selling, the comments are gold as well. Check it out - thanks Cougar for your time, Ronnie
Tue, 6 August 2019
Episode #145 is brought to you by these Rad Ass Sponsors - Support those that support you.
www.prp.com - Seal your build right! Request Precision Replacement Parts at your favorite C10 Parts dealer.
www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC truck parts.
www.azproperformance.com - When you want to upgrade from stock, call the boys at Pro Performance!
www.mar-k.com - The BEST trim available for you and your truck. American made by truck enthusiasts just like you and me.
Aaron and Emily (Williams) Reeves are a true power couple in the automotive scene. They Co-host Flying Sparks Garage on YouTube
Live, Love, Wrench on Motor Trend and are involved with a ton of other things in the Automotive market place. SEMA, RoadKill, Hot Rod Power Tour and Hot Rod Drag Week to name a few.
Emily is a professional model and has traveled all over the world honing her craft.
Some how they keep a balance and make it all work.
Last year this Power couple bought a C20 Utility truck and got it ready for Hot Rod Power Tour. We are glad they did and are now officially part of the C10 Nation.
Great people doing great things - 100 percent!
Fri, 26 July 2019
Episode #144 is brought to you by these RAD ASS Companies.
www.psiconversion.com/c10talk When you are upgrading your motor to an LS or LT based motor - upgrade to PSI!
www.classicperform.com - Remember to use "C10 Talk" at check and save 10% off your order!
www.dakotadigital.com - The BEST!! Updating your gauges will give your interior that WOW factor!
www.accuair.com - The leader in automotive air management and creators of the ENDO system.
Kirk Stricker was moving from Alabama to Cali. Along the way he decides to stop by Gas Monkey Garage and buy some shirts.
While he's there - Richard Rawlings see's his 1969 GMC Short bed truck and wants to buy it!
Kirk has to clean up a few title things first so he stays the night in Dallas that night, planning to take the truck with clean title back to Richard the next day to make the deal.
Theres just one BIG problem!!!!!
The truck is no longer on the trailer when he walks out of the hotel the next morning! DAMN SON!!
This is just the beginning! Tune in and listen to hear what becomes of it.
Thu, 18 July 2019
This Rad Ass Diesel Conversion Episode is brought to you by these C10 Sponsors -
www.vintageair.com - When it's time to upgrade that AC system or add an entirely new system - Vintage Air has what you need.
www.mar-k.com - So much more then just body molding.
www.classicperform.com - Remember - Use "C10 Talk" and save 10% off you order!
www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC restoration truck parts.
Well when you are visiting Northwest Montana you might as well stop by and say "HI' to Sean and the crew over at Diesel Conversion Specialist (DCS) and that is exactly what I did.
DCS - specializes in converting Cummins diesel motors to what ever you want to put them in. Chevy Trucks, GMC, you name it they probably have seen it or done it.
So if you are thinking about swapping in a 12 valve Cummins into that old Squarebody truck, or how about a rad C50 Series. Either way they have you covered - from wiring to adapter plates and relocation brackets too.
If you have any questions, give them a call at (406)755-8878 or check out their website.
Thanks Sean and the DCS crew - I appreciate the shop tour and your time, Ronnie.
Wed, 10 July 2019
Episode #142 is brought to you by these great C10 and OBS companies.
www.psiconversion/c10talk.com - if you are going to swap out that motor for a new LS or LT based power plant - call PSI.
www.prp.cpm - Seal your build right, ask for Precision Replacement Parts at your local C10 parts dealer.
www.azproperformance.com - When you are ready to upgrade from stock, call Travis!
www.dakotadigital.com - Upgrading your gauges is one of the best things you can do for your classic truck.
To kick of the OBS interviews, I thought I would reach out to Travis Dulgerian from Pro Performance. Travis and his team are definitely C10 guys, but they love their 88-98 trucks as well.
So of course we are going to have some fun with it - OBS take over ever now and then.. why not.
Thanks guys, please share the pod, and leave us a review as well. Have a great week, Ronnie.
Thu, 4 July 2019
Episode #141 is brought to you by these RAD ASS C10 companies -
www.Mar-k.com - More then just molding, so much more!
www.classicperform.com - Use "C10Talk" at check out and save 10% off your entire order - Damn Son!!
www.accuair.com - The Leader in Air Management systems and creators of the ENDO system.
www.brotherstrucks.com - Your #1 source for 1947 - 87 Chevy and GMC truck parts.
I had a great time learning about how Sean Provost, got into C10 trucks, and from there was able to assemble a kick ass group of guys to create the Provost Motorsports team, in Woodland California.
Thanks Sean and Dennis (Meyers) for stopping by and letting me drive the Blazer.
Wed, 26 June 2019
This episode of C10 Talk is brought to you by these RAD ASS sponsors!
www.psiconversion.com/c10talk - If you are LS swapping that C10, you want the best - PSI Conversion is that company. Use code "C10 Talk" and get a FREE Shirt and FREE shipping on any order over $250.
www.dakotadigital.com - So many rad Choices for your C10. VHX, HDX, and now the Rad Retro RTX.
PRP.com - SEAL YOUR BULD RIGHT! When you want the best weather stripping ask for Precision Replacement Parts at your C10 Store.
www.azproperformance.com - When you want to upgrade brakes, wheels, AC, gauges, chassis and suspension - This PRO PERFORMANCE - and please tell them Ronnie sent you - it helps me LOL!
Episode #140, KORRY HOGAN
Korry is a NUT - it's official. He's also a really rad dude. Like most guys he always wanted a C10. Well when Korry wants something he doesn't just want a regular something - he wants it to standout!
Like Bare Metal!
Korry is also the Top Fuel record holder for Motorcycle's at 255 MPH - backed up!
He's crashed 3 times going over 200 mph as well!! DAMN SON - I told you he's a nut!
Yes, we do eventually get to talk about his bare metal C10 "GR8SCOT" and why he left it bare metal and what it takes to keep that damn thing clean.
Did I mention he has a 1981 DeLoran too! Ya, he likes cool shit!
Thanks Korry, look forward to meeting you soon, Ronnie
Thu, 13 June 2019
Episode #139 is brought to you by these Rad Ass Sponsors - remember to support those that support YOU - the C10 NATION.
www.mar-k.com More then just body molding - bed wood and SO MUCH MORE!
www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC restoration parts.
www.psiconversion.com/c10talk - Choose PSI Conversion for your LS and LT based wiring harness.
www.classicperform.com - Use "C10 Talk" when you check out and you will save 10% off of your total order.
Joe Molina is a OG C10 Vato for sure. With the Help of John Schick,, they started the Instagram Page, C10 Vato's and really haven't looked back. They are active in our scene and both have killer C10 Trucks.
They love C10's, Tacos and so much more - it's no wonder they have such a rad page.
Check out the episode to hear how it all started and what new things Joe has up his sleeve for not only his page, but his Severed in the Southwest truck Show as well.
Thanks for your time Joe, and continued support - Ronnie
Thu, 6 June 2019
Episode #138 is brought to you by these RAD ASS C10 Truck Companies.
www.mar-k.com - More then just body molding, A lot more.
www.azproperfromance.com - C10 Guys, selling C10 Parts.
www.accuair.com - If you car about air, you ACCUAIR!
www.PRP.com - When you demand the best, demand Precision Replacement Parts. Ask for the green label where ever you buy your C10 Parts.
I was able to head over to Kyle's shop and talk all things Metal OX with him.
How he got into automotive?
What was his first bedside he cut down.
How Many long beds he's cut down.
What's his favorite he's done so far.
Toughest part of cutton one down?
And many, many , more.
Thanks Kyle - the Skye is the limit for you brother, RW
Thu, 23 May 2019
Paul Hitch is currently a 102 year old retiree. He graduated from GM Tech almost 80 years ago - DAMN SON!
Paul was the Chief Engineer of Chevrolet Trucks from 1964- 1976, the heart of the C10 Era.
Episode #137 is brought to you by these C10 Sponsors.
The creators of VHX, HDX, and RTX! - When you're ready to update that interior.
www.prp.com - Ask for Precision Replacement Parts where you buy your C10 parts!
www.classicperform.com - Upgrade those brakes, that chassic - use CPP and get 10% off buy using "C10 Talk" at check out.
www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC restoration parts.
I initially interviewed Mr. Paul Hitch late last year and he was my guest along with his son Doug for Episode #126
He is now 102 years young and still has an TRUE passion for Chevrolet Trucks and Engineering.
Paul it is truly my pleasure interviewing and talking with you. Thank You - Ronnie
Wed, 15 May 2019
This episode is brought to you by the best for the best - you, the C10 Nation!
www.accuair.com The leader in air management and creators of the ENDO system.
www.classicperform.com - Use "C10 Talk" at check out and save 10% for
www.dakotadigital.com - Have you seen the new RTX series gauges? They are a thing of beauty.
www.azproperformace.com - Looking to upgrade anything from STOCK, we don't blame you - they have it!
Hey C10 Nation - sit back, hold on and enjoy the ride. Everything from What you need to wire up you LS motor to your C10, to converting an LS motor to a Nissan Transmission - Yep, its a thing.
So many good guest - you'll have to tune in and listen, from the Burnout Kid - Dan Glauser, to Miss Boosted Erin herself.
Like I said, get in, sit down, and hold on - we going for a ride - and LS Fest Ride!!
Thanks Bill and Holley for the hospitality and support, Ronnie
Tue, 7 May 2019
This Episode is brought to you by these rad ass companies - Please support those that support you.
www.prp.com - Seal your build right and ask for it at your favorite C10 parts store.
www.mar-k.com - So much more then just the best body molding.
www.classicperfrom.com - Use code "C10 Talk" at check out and save 10% off your total order - 10 % Damn Son!
www.brotherstrucks.com - Their Show and Shine is July 7th 2019 and registration is open.
Catching up with our friend Mike Finnegan. You know Mike from the wildly popular YouTube/MotorTrend show, RoadKill. He is also the star of his own YouTube show "Finnegan's Garage" If you haven't seen it yet, head over and check it out and subscribe.
I talk to Mike about what he has been up to lately. We talk about his C10 Project, His latest Squarebody Ramp Truck, and his thoughts about the move of Roadkill to MotorTrend.
Fri, 26 April 2019
Episode #134 is brought to YOU the #C10 Nation by these RAD ASS sponsors.
www.accuair.com The leader in Air Management and creators of the ENDO System.
www.classicperform.com - Use "C10 Talk" at check out to save 10% - Damn Son - 10%
www.dakotadigital.com - Have you seen their new RTX gauges, they look classic, but believe me they aren't.
www.azproperformance.com - Your C10 Specialist. They don't just sell parts, they build them too. Give them a call and tell them Ronnie sent you.
GSI - This is what C10 Talk is all about. Getting to know the builders, the manufactures, and the community - bringing you their stories.
Scot, Anthony, and Dan stopped by and we cut it up for 2 hours - talking about the beginning, the products, the hardships, and their favorite - you their customers.
It's the people this scene what it is. What is it - its awesome trucks, built amazing people and a scene that is unmatched.
Thanks for stopping by fellas - good luck on the next 5 years.
Sat, 20 April 2019
It's a busy weekend for the C10 Nation, plenty to choice from.
C10 Nationals - Dallas Fort Worth
Wed, 17 April 2019
Episode #133 is brought to you by these Rad Ass C10 Companies - Please support those that support you.
www.azproperformance.com - When you are ready to upgrade from stock!
www.classicperform.com - Save 10% when you use code "C10 Talk" at check our. CPP has you covered, New Breaks, LS Swaps and static drops.
www.accuair.com - The leader in automotive air management and creators of the amazing ENDO system.
www.dakotadigital.com - upgrade you interior with the BEST - VHX, HDX, and the RAD ASS RTX gauges.
C10 Talk heads East to Mississippi to experience some Southern Hospitality, and it DID NOT disappoint!
Go Karts, BBQ, Beer, Crawfish, C10's and amazing people - thank you Jason, Angela and Family - C10 Club Mississippi.
Tue, 9 April 2019
Episode #132 is brought to you by these RAD ASS C10 Companies -
Your #1 Source for 1947-87 Chevy and GMC restoration parts.
Use code "C10TALK" at check out to $ave 10% - DAMN SON!!
Depend quality - demand Precision! Ask for the green label when you buy your weatherstripping.
More then body molding - bed wood and so much more!
Josh Mazerolle – Vague Industries
Josh is a crazy cowboy hat wearing man who loves to live life to the absolute FULLEST!
This dude has some how got himself into a cross country trip that includes delivering a turbo'd 5.3 LS from New Hampshire, to Texas. Then from Texas, Josh will drive to LA to pick up a 1966 Chevy C10.
He will then drop off his 1977 Toyota Hilux and drive the C10 back to Texas to the Flying Sparks Garage - where Emily and Aaron Reeves will help him install the 5.3 into the C10. Josh then will drive the C10 back to LA and jump back into his Toyota.
From California the C10 owner and Josh along with who ever else wants to join in will caravan to LS Fest in Las Vegas.
Oh Ya - his Hilux is powered by a 6.0LS with a Monster Transmission 4L80 and the truck has twin turbo's and it's putting out over a 1000HP!! Damn Son!
Follow along and lets see how it goes.
Fri, 5 April 2019
Episode 131 is brought to you by these RAD ASS C10 Companies.
Support those that support you and your passion!
Chassis Tech #3 features -
Jason and Sal from TCI - a 45 year chassis company that started with Hot Rods and and evolved greatly into just about anything on wheels.
Second up is Justin from Scotts Hotrods. Justin has a true passion for building rad things, that passion started very early for him and has continued for 25 years now.
Thanks for listening - Ronnie
Mon, 1 April 2019
Episode #130 is brought to you by these RAD ASS C10 Companies!
www.mar-k.com - More then just body molding, bed wood and so much more.
www.Prp.com - Seal your build right, Precision Replacement Parts - ask for it where ever you shop for your build.
www.dakotadigital.com - Upgrade that interior with the BEST in gauges. VHX, HDX, and their new RTX gauges.
www.azproperformance.com - When you want to upgrade anything on your truck, call Travis and Nick. They are C10 owners and want to help you with your build.
Chassis Tech #2 -
Roadster Shop www.roadstershop.com- Phil and Jeremy Gerber.
We hit the jack pot with Phil and Jeremy as they talk about all things chassis and suspension. These guys have a ton of history and passion when it comes to our trucks and the chassis they offer the C10 Nation. They give us a few sneak peaks as well to a few things that will be coming out in 2019 for out trucks. Thanks fellas.
Self Mad Fab - Brandon started off doing some killer filler panels and that has evolved into suspension options.
Brandon shoulds like a dedicated hard worker who loves what he is doing and what he is making everyday. Thanks Brandon, keep grinding.
Fri, 22 March 2019
Episode #129 is brought to you by these Rad Ass C10 companies -
www.prp.com - Seal your build right!
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC truck restorations parts.
www.accuair.com - The leader in automotive air management and creator of the ENDO system.
www.mar-k.com - NOW offering Squarebody Molding.
Part 1 of our two part series - the ChasC10 features -
Nate Porter - www.pbfab.com
Griffin Gunner - www.acmechassisfactory.com
Vince Lombardi - www.cbcpro.com
Spenser Rydman - www.rydmanranch.com
It was my honor to sit down and talk C10 Chassis with these four fabricators in Part 1 of a 2 part series on C10 Chassis companies and options for the C10 Nation.
Tue, 12 March 2019
I recently installed a Holley Terminator (TBI) system in YelLOWstone with the help of Johny G and Jason "Big 10" Bowman.
Holley Terminator - #550-445 (Classic Gold)
Holley Dominator Big Block intake - #300-5
GM - 4L80E
GM O/D gauge selector - 84 to 89.
Dakota Digital - Guages
Classic Performance Products -
Brothers Trucks -
Sending Units -
Intake Walbro #255 fuel pumps
GM Fuel Selector
Johny G - @66chevy
Jason Bowman - @Big10Garage
As you can see there was a lot that went into the new set up and it runs great.
Thanks to Johny and Jason for the help.
Wed, 6 March 2019
#127 is brought to you by these Rad Ass C10 Companies -
www.mar-k.com - More then just moldings - so, so much more - Made in the USA.
www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC truck parts - check out there killer DIY videos too.
www.PRP.com - Demand Precision - ask for Precision Replacement parts at your favorite C10 Retailer.
www.classicperform.com - Save 10% by using code "C10 Talk" at check out - 10%!!
Lonestar Throwdown is one of the biggest truck/car show gatherings in the South - Every year thousands gather for an unmatched atmosphere - Fun, Friends and Rad Ass Cars and Trucks.
Ronnie grabs a few interviews from the show and captures the true vibe of one the best shows out there.
Thanks for tuning in and listening to C10 Talk. Please remember to SHARE, SUBSCRIBE, AND LEAVE US A REVIEW.
Fri, 1 March 2019
Episode #126 is brought to you by these Awesome C10 Companies.
www.AZProPerformance.com - When you're ready to upgrade from stock.
www.DakotaDigital.com - Have you seen the new RTX gauge - Stock look with Dakota Digital performance. Rad Gauges.
www.classicperform.com - Use "C10 Talk" at check out to save 10% off your total bill.
www.accuair.com - The Creators of the ENDO system and the Leader in Air Management.
Paul Hitch was the Chief Engineer of Chevrolet Trucks from 1965 - 1976. Working for GM from 1935-1978.
Paul will be 102 years old, March 2 2019 - Amazing.
Paul shares some great knowledge with us about the trucks, the history and his career.
His son Doug Hitch sits in on this one as well.
THANKS PAUL - HAPPY BIRTHDAY, Ronnie and the C10 NATION.
Mon, 18 February 2019
Episode #125 - Is brought to you by these Rad Ass C10 Companies.
www.classicperform.com - Save 10% for using the code "C10 Talk" at check out - Damn Son, 10%!!
www.prp.com - If you want to SEAL YOUR BUILD RIGHT, seal your build with Precision Replacement Parts.
www.mar-k.com - Have you guys seen Mar-K's new Squarebody Molding? Brand New for 2019!!
www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC restoration Parts.
Eric Stanczak is currently the Chief Engineer of Chevrolet Full Size Trucks. This is the same position our next guest, Mr. Paul Hitch held from 1965 - 1976.
Eric had the opportunity to meet, and interview Paul last year. I sit down with Eric and talk to him about the experience and what it meant to him.
Thanks Eric, Ronnie
Wed, 30 January 2019
Bonus is brought to you by @
I talk about Eastbound and Down 3rd year run to Lone Star Throwdown.
I sit down and chop it up with Wrench'd Star Justin Nichols and we talk about what we can look forward to with Season 2 of Wrench'd on the MotorTrend TV.
Premiering Feb. 6th.
Fri, 25 January 2019
Episode #124 - Interviews from Barrett Jackson Live is brought to you by these rad ass C10 Sponsors - Please support those that support us.
When you need to upgrade those old gauges - Dakota Digital.
Upgrade from stock - thing Pro Performance!
Save 10% - Use code "C10 Talk" at check out and Save Big!
The Leaders in Automotive Air Management.
I spent a few days running around Barrett Jackson Scottsdale 2019 and grabbed a few interviews along the way.
Dan Hogan - @hogieshine - sold two trucks, a 1964 C10 Longbed with 9.1 original miles "Lambrecht Trucks" and a 1968 K10 that was a completely fresh build Dan and his son built.
Todd Carpenter - @bigfishgarage - sold tow trucks as well. A 1986 K10 short bed - fresh build, and a GMC Crew Cab Dually with an "Indy Hauler' theme to it.
Mike Blackwelder - @67patriach - sold his Custom 1967 C10
It was fun to see a few of the fellas throughout the week and there was no shortage of C10 Trucks (91 - on my count) this year at Barrett Jackson. The Top Seller was a 1969 K10 - that sold for $137,500 with fees. Damn Son!!
Fri, 18 January 2019
Episode #123 is brought to you by this Rad Ass C10 Sponsors!
www.accuair.com - The leader in Air Management.
brotherstrucks.com - Your #1 Source for 1947-87 GMC and Chevy Truck parts.
www.ClassicPerform.com - Use "C10 TALK" at check and save 10%.
www.dakotadigital.com - Have you seen there new RTX gauges - DAMN SON!
Cheyenne Lord invited me over to his casa and we laid down some Pod and a shit ton of rubber.
Cheyenne is the proud owner of the Diesel Brothers, SM/CO C10 that was built on the Diesel Brothers TV show.
Cheyenne has owned a few C10's along the way, and while watching the TV Show one day he got a hair up his ass and thought why not build a diesel C10 with this dudes. The rest is TV history.
Cheyenne will be selling the truck this Saturday at Barrett Jackson in Scottsdale, Arizona.
Will the truck sell for more then Cheyenne has in it? Well I guess we'll have to sit back and see how it all shakes out.
I have a great time, thanks for sitting down with the C10 Nation Cheyenne.
Wed, 9 January 2019
Happy 2019 C10 Nation!!!
Ronnie talks about upcoming ideas for the Podcast in 2019. He runs over how himself and 9 others were able to finalize the Top 10 trucks for the C10 Nation, C10 of the Year 2018.
You can vote at www.c10nation.com
Sam Castronova stops by to pick up his "Best episode of 2018" trophy, voted on by you - the C10 Nation.
That turns into a 30 minute episode catching up with Sam. Finding out how people responded to his episode and catch up on his current build Palo, and that has happened since we talked to him last.
One of new feature is a voice mail tab on the website - leave us a comment and let us know how were doing or if you have something you feel you really just either want to get off your chest or unload on the C10 Nation.
Until next week - have a good one, Ronnie
Tue, 18 December 2018
Episode #121 is brought you by these Rad Ass C10 Companies.
Check out our sponsors, they are true to our community and provide the BEST in C10 Aftermarket products.
Episode #121 I sit down with Andrew Erichsen from Painless Wiring www.painlessperformance.com
They provide complete wiring harnesses for our trucks and the quality to re-wiring your truck is second to none.
Thanks Andrew, it was great getting to chat about all things Painless.
Tue, 4 December 2018
Episode #120 is brought to you by these Rad Ass C10 Sponsors - remember to support those that support you.
Big thanks to Magna-Flow for the booth and studio set up at SEMA, and Chris from Shout Engine, who make it all happen.
I was able to sit down with David and JD from Mar-K Quality Parts. www.mar-k.com
We talk all things bed wood, and trim. Truck molding, and their new HIGHLY ANTICIPATED 73-80 "Squarebody" side molding that will debut Jan. 2019 and is available now at www.squarebodymolding.com
We also are excited to announce a voting pole on our home page www.c10nation.com where you can vote for your favorite episode of 2018.
Thanks for listening and please remember to share, rate and review the podcast.
Wed, 21 November 2018
Episode #119 is brought to you by these Rad Ass Sponsors.
Live coverage interviews from the 8th annual Dino's Git Down. New location and over 700 trucks - DAMN SON!!!
This 3 day event has easily turned into the C10 Party of the Year.
Trinity "Its like a family reunion and Class reunion combined!"
Tue, 13 November 2018
Episode #118 is brought to you by these Rad Ass sponsors.
Jim and Mike Ring, co-founders of Ringbrothers, were born with fuel running through their veins and a passion for building innovative cars. As young as 10 and 11 years old Jim and Mike were doing body work and painting cars anywhere they could, including in their parent's basement and a friend's chicken coop.
The Ringbrothers shop, headquartered in the small town of Spring Green, Wisconsin, pulls double duty, serving as a collision and repair shop to the community in addition to delivering one to two custom built cars a year.
In addition to collision repair and custom builds, Ringbrothers also produces an entire line of high-quality billet accessories as well as custom fiberglass and carbon fiber pieces. The billet accessories combine form and function to create a truly unique look that stands apart with craftsmanship and build quality that is second to none. The Ringbrothers line of fiberglass and carbon fiber body pieces gives fans the opportunity to incorporate the Ringbrothers signature style into their own builds.
Ringbrothers has rocketed into the top ranks of American car builders over the past decade, winning numerous design awards including the General Motors award for “Best Chevrolet of Show” at the 2014 SEMA Show, back-to-back Goodguys Street Machine of the Year awards, multiple Mothers Shine Awards, countless magazine covers, and several builds commissioned by OEMs.
Thu, 8 November 2018
Ronnie shares his thoughts on SEMA 2018, from a C10 perspective.
DAMN SON there was a lot of RAD ASS trucks.
Kudo's to all the amazing builds and builders!
Fri, 26 October 2018
SEMA 10, #10 - I sit down with the C10 Doctor, Rob Yezzi and Broey as we talk about SS02.
This Indy Hauler inspired build I'm sure from the sounds of it WILL NOT DISAPPOINT.
Much like its predecessor - SS01, I have a feeling this thing will add to the Joe Yezzi legacy of builds.
This classic will be unveiled at SEMA 2018, this Tuesday in the Royal Purple booth - #23061 at 10 am - Central Hall.
Thanks for sitting down with me fellas, always a pleasure and I know ALL of the builders were crunched for time.
These episode's wouldn't be possible if it wasn't for these guys taking the time to sit down with C10 Talk and spread the word to you - the C10 Nation!
Episode #116 is brought to you by
www.prp.com - Seal your build right, ask for Precision Replacement Parts.
www.us-mags.com - Have you seen their lastest wheels, head over to their website and check them out.
Wed, 24 October 2018
Robby and Rad Fab Tanner - 1964 C10
TMI Waylon - 1967 C10
Lyon from Finish Line Speed Shop - 1978 GMC truck, and a 1966 GMC Suburban.
3 more kick ass builders, building rad SEMA rides.
Thu, 18 October 2018
Josh Shilling - Pro10, this thing is straight Race Truck!
Travis Pruis - The Man over at CTP Concepts is building a 1967-72 C50 Crewcab, Duramax car hauler! Damn Son!!
I'm thinking we might need to get these two together for a picture!
Fri, 12 October 2018
#113 - is brought to you by
www.prp.com - Seal your build right!
www.us-mags.com - check out their killer wheel selection!
Brad Mckinnon is back, with his rescued 1948 Chevy Suburban Carry All.
Brad will be in the Doug Thorley booth at SEMA with this killer build and we were able to get a with him and talk all things "CarrYall"!!
Tue, 9 October 2018
First 3 Builders of 2018's SEMA 10 Show.
Jack Frith of Redemption Trucks
Brian Vowell of Frontier Shop Supplies
Travis Dulgerian of Pro Performance.
Wed, 3 October 2018
Episode #111 is brought to you by
www.brotherstrucks.com - Your #1 Source for all of your 1947-87 Chevy and GMC restoration needs.
www.azproperformance.com - When you want to upgrade from stock - call Travis and Nick, They know C10 Trucks!
www.accuair.com - Have you seen the ENDO AccuAir system, you need to!! Revolutionizing the Automotive Air Management industry.
www.classicperform.com - Remember to use "C10 Talk" to save 10% off your entire order.
Chris Hamilton is an East Coast guy with a diverse media background, from print, digital and marketing. His biggest asset is his passion for the truck industry and scene.
He is the new Editor and Chief of Street Trucks and the C10 Builders Guide. He has 4 issues out and plenty more on the way.
Good luck in your new job and we look forward to plenty of Rad Ass issues. Don't forget about us C10 guys and Blood, Sweat and Gears!
Fri, 28 September 2018
First Ride Friday #6 with Street Trucks Editor and Chief, Chris Hamilton.
This Episode is brought to you by -
www.us-mags.com - check out their website, I promise you'll see something you'd like to have.
www.prp.com - Precision Replacement Parts has a "Vent Window Refurbishing Program" that you need to check out. Save yourself the headache and time - send them into PRP.
What was Chris's first ride? Well, it was a Chevy, and it was a truck. I guess you'll have to check out his "First Ride" episode to find out more. Thanks Ronnie
Thu, 27 September 2018
Over 900 C10's in the Park, in one day! Damn Son!!
#110 - is brought to you by this Rad Ass Sponsors.
www.classicperform.com -Use code "C10 Talk" and save 10% at check out.
www.dakotadigital.com - Have you seen the latest in digital gauges with that classic look we all love - RTX!!
www.mar-k.com - remember to use "C10 Talk" and save 10% off your bed wood, bed wood hardware and bed wood strips.
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy & GMC restoration parts.
C10's in the Park - I was able to grab 10 great interviews from the show. Waxahachie didn't disappoint.
Great people, killer trucks, and the C10ville!
Fri, 31 August 2018
This is C10 King approved.
How about a little pre-show interview about the 1st Annual C10 Intervention, in Auburn California Sept. 16th 2018
If you have a Chevy or GMC 1908-1998 This is the show for you. www.c10intervention.com
Wed, 29 August 2018
Adam Pilate has been cleaning and detailing things for over 35 years!
He started by cleaning bicycle's, with his passion for cleanliness and helping others Adam built Adam's Polishes - One of the industry leaders in car care products.
Adam is a great dude who is so damn passionate about car care and his story is on point. Im stoked to bring it to you C10 Nation.
Adam is hooking us all up too!
15% off your entire order and FREE SHIPPING through Sept, ending Oct 1. Use Code "C10 Talk" at check out!!!
I'll be loading up. Check them out.
Episode #109 is brought to you by these Rad Ass companies.
www.azproperformance.com - When you are ready to upgrade from stock give Travis and Nick a call.
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts.
www.mar-k,com - SAVE 10% off on all bed wood, bed strips, and bed hardware by using code "C10 Talk" at check out.
www.classicperformance.com - Use Code "C10 TALK' at check and save 10% off your entire order - breaks, steering, suspension and so much more.
Thanks for listening C10 Nation. Remember to share the podcast, rate and review for us.
If you have any questions or concerns - email me www. firstname.lastname@example.org
Fri, 24 August 2018
First Ride Friday with Adam Pitale. Adam is the hard working, inspiring leader of Adam's Polishes.
Adam's first ride was a '65 Mustang convertible with a 289. Talk about a sweet first ride, red too!
This episode of FRF is brought to you by -
www.prp.com Seal your build right!
www.us-mags.com Log on and check out all the rad wheels they have. I promise you you're going to find something that fits your style.
Tune is next Tuesday for the full episode with Adam. Have a great weekend C10 Nation.
Please remember to "like" the podcast and give us a review where ever you tune in! Thanks Ronnie
Wed, 22 August 2018
Sponsor Spotlight #4
RAD!! Reno Heon from AccuAir stops by the C10 Talk Studio for the AccuAir segment!!
Aaron from CPP was cool too - lol, thanks Aaron for chatting!
Tons of great content - AccuAir and the ENDO CVT info - obviously some "Trial and Air" but they have worked through it all and are killing it with the new set up. Orders are shipping and the retailers are slingin' these things.
CPP - has the same thing going on with they're new Coil over bolt on kits as well.
Tons of info on both of these interviews. Thanks for listening and please remember to share the pod, and leave us a review. Ronnie.
Mon, 20 August 2018
Ya Buddy -
www.mar-k.com For that free Catalog!
www.brotherstrucks.com - For all you truck needs and to sign up for that mailing list too.
www.c10triplecrown.com - check out the Triple Crown.
Todays Sponsor Spotlight I sit down with JD from Mar-K and we talk about a ton of stuff they have going on, especially their NEW 73-80 Body molding coming out very soon.
I also talk to Steve and John from Brothers Trucks. Steve breaks some news about the 21st annual Show and Shine and we talk C10 Triple Crown and so much more.
Fri, 17 August 2018
Sponsor Spotlight with
#2 of Sponsor Spotlight, I sit down with Derek Churchyard from Precision Replacement Parts and Travis Dulgerian of Pro Performance.
Let me know what you think of the Sponsor Spotlight.
Please remember to Share the Pod, rate the Pod, and just plain ol' enjoy the shit out of the POD!
Thanks C10 Nation, Ronnie
Wed, 15 August 2018
We check in with Mario from US Mags and Greg from Dakota Digital and see what's new with them. What they have for you - the C10 Nation.
Wed, 8 August 2018
Episode #108 with Brandon Sisco is brought to you by these Rad Ass Sponsors - support those that support you!
www.accuair.com The leader in Automotive Air Management Systems and the creator of ENDO & the ENDO system.
www.dakotadigital.com - Have you seen their new Retro style HDX gauges - DAMN SON! Their Retro Rad.
www.classicperform.com - When you need to upgrade your suspension, your steering and so much more. Remember to save 10% of your entire order, use code "C10 Talk" at check out to save!
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts. Check out their DIY videos on their website as well.
Brandon Sisco has seen more, built more, lived through more then most do in a life time and he's only 42! Damn Son.
Brandon is the lead fabricator for The Barrett Jackson Speed Shop, and formally of Sisco Fab. While working for Barrett Jackson, Brandon built the GHOESST - a one of a kind 1968 "Tahoe" style hard top SUV.
If GM would have made one of these in 67/68 as possibly a concept and it sat for 50 years then was pulled from a shed somewhere. This is exactly what Brandon was able to envision and build.
Such an amazing, award winning creation!
Brandon has been building and Fabricating since he was 15. He's had some crushing blows in his life but he keeps getting up. His mom's passing when he was 11 years old. His shops fire when he was in his early 20's, stress induced cardiac issues and so much more!
Even though it seems like he's already built so many Rad Ass rides - I've got a feeling he's just getting started.
Teaming up with the world famous Barrett Jackson Team is going put Brandon deep into the mix of classic builders and one off customs - I can't wait to see what comes next for Brandon and his team.
Speaking of team - Brandon and his amazing wife (Missee Sisco) will be teaming up on a SEMA 2019 C10 as well.
Keep up the amazing GRIND Brandon and thanks for sitting down with C10 Talk - we wish you nothing but the absolute BEST brother. Ronnie
Fri, 3 August 2018
FR#4 is brought to you by -
www.us-mags.com - Check out their new 2018 series and much, much more.
www.prp.com - Everything you need to "Seal your build right" and killer video tutorials to show you how to do the job right too.
Brandon sits down and tells us about his FIRST! This bad boy was a Squarebody StepSide K10 that started off as an Uncle's $700 purchase to Brandon after he sold his 4H sheep to pay for it.
Brandon and his dad went and picked up and Brandon really has been addicted to cars/trucks ever since!!
Sit back as Brandon takes us on his journey and love affair with this Rad Ass Big Yellow Stepper.
Its really cool to hear how vested Brandon was at such an early age and this truck has a lot to do with it. He cut his teeth on this bad boy and the automotive world, and the C10 Nation is better for it.
Great story Brandon - Ronnie
Tue, 24 July 2018
Coverage and interviews from the first Git On Up.
This Podcast is brought to you by these Rad Ass Companies.
www.clasicperform.com - Use Code "C10 Talk" at check out and save 10% off your entire order. Damn Son!!
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy & GMC restoration parts - check out there DIY tech and video's while you're there.
www.azproperformance.com - looking to upgrade from stock! Call Travis and Nick, and tell them I sent you. They have the products and the knowledge to get your C10 the way you WANT it!
www.mar-k.com - the BEST in the business - side molding and SO MUCH more. The sooner you get that catalog, the sooner you'll know.
The Canadians took GREAT care of us! We had a blast and got to see how they do it North of the Border.
Friday we hung out at the host shop - a few Barley Pops where consumed! Saturday was a back country cruise - through some beautiful Canada Farm Country. Sunday was the show. 100 + trucks - not bad for their first show. Not bad at all!
Thanks Darren, Justin, and especially Kevin Stickel and Fam. You guys rock. Ronnie
Tue, 10 July 2018
Kevin Stickel takes the mic and interviews
John Oro - C10 Club
Carlos Vidales - Dropped Lower
Payson Wetch - C10 Talk Jr.
Del Ushenko - Delmo Speed
Yours Truly, Ronnie Wetch - C10 Talk
Fun times ahead.
This episode is brought to you by www.us-mags.com - check out their new 2018 Styles - and so much more.
Sat, 7 July 2018
Episode #106 is brought you by these kick ass Sponsors -
www.accuair.com - The leader in automotive air management and creators of ENDO.
www.dakotadigital.com - VHX, HDX, and NOW - RTX, check out their retro styling HDX gauges now.
www.classicperform.com - Remember to use code "C10 Talk" at check out to save 10% off your entire CPP order.
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration and aftermarket parts.
Interviews from the 20th Annual Brothers Show & Shine.
Thu, 28 June 2018
Episode #105 is brought to you by these Rad Add Companies!
www.mar-k.com - So much more then just moldings. Check them out.
www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy & GMC restoration truck parts.
www.azproperfromance.com - When you're ready to upgrade from stock - they have what you need.
www.classicperform.com - Use code "C10 Talk" at check out and save 10% off your total order.
About time I sit down with Marcel and Jason from www.autorevolutiononline.com so much great content.
These dudes work very hard at bringing the automotive enthusiast so much rad ass online content right at your finger tips.
If you haven't, check them out.
Thanks to both Marcel and Jason for sitting down with me, Thanks fellas - goodtimes!
Fri, 22 June 2018
First Ride Friday is brought to you by
Check out their killer selection online, from Rad to Retro Rad, they got you covered.
Sat down with Jason Mulligan and Marcel Venable from
And talked to them about their first rides!
Had a blast fellas, #goodtimes!! Thanks Ronnie
Tue, 19 June 2018
Episode #104 is brought to you by these Rad Ass Companies - Support those that support you.
www.accuair.com - Have you seen or HEARD AccuAir's Endo CVT yet?
www.dakotadigital.com - When you are ready to upgrade those stock faded gauges, Dakota has what you need.
www.ClassicPerform.com - Use "C10 TALK" at checkout and save 10% off your order.
www.brotherstrucks.com - Your #1 source for 1947- 87 Chevy and GMC restoration parts.
Grant Cox, the Kansas Man behind the camera.
I had a great time getting to know Grant Cox. He is truly passionate about all things automotive and takes great PRIDE in making sure he delivers the absolute best product for his customers and their rides.
Thanks Grant, Ronnie
Fri, 15 June 2018
First Ride Friday with Grant Cox is brought to you by
Grant Cox is a remarkable photographer who has shot multiple cover trucks, SEMA trucks and much more.
Hear about his "First Ride" a 1980 Datsun truck his dad handed down to him when he was 14, in 1989.
I'd digging this First Ride thing - let me know what you think, Ronnie
Fri, 8 June 2018
This Episode of First Ride Friday is brought to you by
New series where Ronnie discuss with his quest their "First Ride". What it was, and what it meant to them or maybe means to them now.
Also - their "First C10/K10/K5" was as well.
So I Starts things off with his "First Ride" which was an '81 Plymouth Horizon Mizer.
At the time, it wasn't his favorite, but it grew on me and as an adult with a son about ready to drive it was wheels, non the less.
Thanks for tuning in, have a great week C10 Nation.
Fri, 1 June 2018
This Friday 15 is brought to you by www.us-mags.com
Update on the Run to Brothers and a listener reaches out about finding a long lost truck that he grew up riding in and would like to get back into the family!
Thanks for listening and have a great Weekend - IT'S FRIDAY C10 NATION - act like it!!! Cheers, Ronnie
Tue, 29 May 2018
Episode #103 is brought to you by these Rad Ass Sponsors.
Use Code "C10 Talk" at check out to save 10% off your entire order.
More then just trim! Some of the sickest bed wood out there.
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts.
www.azproperformance.com - When you want more then stock!
Good time sitting down with Chris Dunlop aka Pinstripe Chris @pinstripe_chris - This Dude is so damn talented - he has it. Vision, passion, and most importantly WORK ETHIC.
Check out his social media and follow along as he creates some of the coolest shit out there.
Thanks Chris, Great getting to know you brother, Ronnie
Kevin Aguilar's new media format is Instagram @fuelishmedia
Brothers Truck show - June 24th, details at www.brotherstrucks.com
This will also be the first leg in the C10 Triple Crown - details on website below.
July 14th in Tennessee - 8th annual Southeastern Chevy/GMC Truck Nationals.
July 26th - 28th Oregon State Fairgrounds - The Awakening
Aug 11th - All Squared Up - Dawsonville, Georgia email@example.com
C10's in the Park - Waxahachie, Texas - Sept 15th
Fri, 25 May 2018
Quick bonus episode -
I have been looking to get a 73-75 K5 Blazer, well I ended up getting 2 in a weeks time.
How in the hell!!
Have a great Memorial Day Weekend C10 Nation.
Thanks for the continued support - Please remember to share the podcast, and rate and review the show.
Sun, 20 May 2018
Episode #102 is brought to you by these Rad Ass Companies - remember to support those that support you.
www.accuair.com - Makers of the ENDO air management system.
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy & GMC restoration parts.
www.classicperform.com - Use code "C10 Talk" at check out and save 10 % instantly.
www.Dakotadigital.com - Is it time to upgrade those old faded stock gauges. Dakota Digital has a perfect cluster for you.
Episode #102 is interviews from the first C10 Nationals Truck show at Texas Motor Speedway in Fort Worth Texas.
I was able to interview some heavy hitter in our scene, Becky from LMC, Pat Maxwell - the "Hired Gun", and Mr. Rob McGregor from No Limit Engineering.
This is just a few - so get your ass out in the garage, the shop, or under the shady tree - turn up the C10 Talk and start wrenching.
Thanks for listening and all the continued support C10 Nation, Ronnie
Fri, 11 May 2018
Tune in Tuesday May 15th on Velocity at 9pm Central - for the premier of Wrench'd with Justin Nichols and the rest of the rest of the crew from Watseka, Illinios.
Tue, 8 May 2018
Episode #101 is brought to you by these Rad Ass C10 Companies.
www.mar-k.com - More then just body molding, bed wood and so much more, check them out.
www.azproperformance.com - When your ready to upgrade ANYTHING on your truck - Call Travis!
www.classicperform.com - Use "C10 Talk" at checkout and save 10% off your order.
www.brotherstrucks.com - Your #1 Source for 1947 - 87 Chevy & GMC restoration parts.
Congrats Kevin and thanks for sitting down with us.
If you are looking to restore a 1973 to 1987 Chevy or GMC truck, you need this book. It's a must have for anyone looking to build or even own a 1973 to 1987 Chevy Truck.
Wed, 25 April 2018
Episode One Hundred!!!
Dino Battilana - Mr. Chevy Only
Its been over 3 years since we sat down with Dino and caught up!
A lot has happened - Trucks, The Git Down, Marriage, Trucks, Other Hobbies, Trucks - Life is good, and Dino is proof that our C10 Scene is kicking butt.
The Trucks are Cool, but guys like Dino are Cooler! Thanks Big Kat for everything, Ronnie
Episode #100 is brought to you by these Rad Ass Companies.
www.accuair.com - The leader in automotive air mangagment - AccuAir!
www.dakotadigital.com - Is it time? Time to replace those old faded, worn out gauges! Dakota Digital has what you need.
www.classicperform.com - Use "C10 Talk" at checkout and save 10% off your total order.
www.brotherstruck.com - Your #1 Source for 1947-87 Chevy and GMC restoration truck parts. Brothers!
Remember to share the podcast and please leave us a review.
Tue, 10 April 2018
Episode #99 is brought to you by these kick ass Companies!
Support those that support you!
Audio Tech with John Myers from Kicker Audio.
John and I talk all things automotive audio.
What's the best format to listen to your music?
Where should you put those speakers?
What is the best way to power your system?
Should you have your system tuned? By a Pro?
How much do you need to spend on a "good" system?
So much more - great guest and I had a blast, thanks John - Ronnie
Wed, 4 April 2018
C10 Nation - Here is a quick update to the Upcoming C10 Nationals truck show coming up next month May 4 & 5th.
The show will be held at Texas Motor Speedway in Fort Worth Texas.
There will be -
Burn Out contest
And you can WIN a 1985 C10!!!
For any further information.
Thu, 29 March 2018
Episode #98 is brought you by this Rad Ass Companies!
Just saying - support those that support the pod!
www.mar-k.com - More then just body molding, a lot more!
www.dakotadigital.com - Time to swap out those old gauges?
www.classicperform.com - From big breaks to drop spindles, CPP has it and you save 10% when you use code "C10 Talk" at check out.
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts.
Nick Germano from Outkast Kustoms has been getting a lot of attention with his killer 68 Chevy C10. If this truck could only talk! Form one owner to another, finally falling into Nick's hands and someone with not only the vision but the team, including the infamous Bob Grant to see the build through. From SEMA 2016 and 2017, to cover of Street Trucks, and his recent hardware, Best of LST 2018!
Nick has worked with Clint the original owner and Bob to keep parts of the original theme intact, yet adding his own spin to make it his!
Nick, recently married has a new addition coming to the Germano family, and were not talking about an S10 Blazer, either.
Thanks Nick, grateful for your time brother. Congrats on all of your recent trophy's and most importantly, Baby Germano!
Wed, 21 March 2018
Episode 97 is brought to you by -
Classic Performance Products - CPP
Az Pro Performance
Mon, 12 March 2018
Episode #96 is brought to you by these rad ass sponsors.
For C10 Talk and C10 Nation gear head to www.c10nation.com
We made the journey - and we made it a fun one! Over 2500 miles round trip from Phoenix, and some logged over 4000 - Damn Son!
The trucks are cool, but the people are cooler!
Sat, 3 March 2018
Episode #95 is brought to you by these kick ass companies -
Support those that support you!
www.dakotadigital.com - When you are ready to upgrade those old stock gauges.
www.mar-k.com - more then just body moldings, exotic bed woods and so much more.
www.classicperform.com - use "C10TALK" at check out and save 10% off your total order.
www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration truck parts.
Episode #95, 8 killer interviews from builders from across the country.
Texas, Oklahoma, South Carolina, Iowa, Louisiana, Colorado and Japan, Yep - Japan!!
Tue, 13 February 2018
Episode #94 is brought to you by these Rad Ass Companies -
AZ Pro Performance
Classic Performance - CPP
Sam Castronova has been a fixture in the C10 Community as a back yard builder, a SEMA builder, a friend and so much more. Follow along as Sam tells us about how he discovered Delmo, Dino, Joe Yezzi, Blake Stoner and so many more!
You will laugh, I guarantee it - I had a great time sitting down with Sam in his garage and I look forward to seeing what he does next.
Tue, 30 January 2018
Ronnie sits down and talks with a few listeners that submitted questions.
Sitting down with the listeners, the C10 Nation and interacting with the questions that they have was fun.
If this is something the listeners like we will continue to do it.
Wed, 10 January 2018
Episode #92 is brought to you by all of the C10 Talk sponsors for the kick off 2018 Episode.
Classic Performance Products - use "c10 talk" at check out and save!
AZ Pro Performance
Mar-K Quality parts
Stacey David. Gearz TV
Tell us about Stacey David?
How’t you get into wrenching?
What have you been up too? That tow truck is pretty bitchin!
Talk about "Trucks" talk about "Gearz".
Trucks with Stacey David - was like Saturday Morning Cartoons to me!
How long TV?
4x4 trucks too = I think it was like a Purple Bronco.
Lets talk about Copperhead? Did it turn out the way you guys had planned?
572 BB motor?
Bucket list? for a guy that gets to build some rad shit! What’s your favorite style truck(s)
Whats your favorite part of the build process?
What cars do you currently own?
Favorite truck? Did you have a Dodge Truck Lil’ Red Wagon at some point?
Guitar collection and you’re a rocker - who’s your favorite band/group?
I hear there is another C10 in the works?
Any 2018 Plans?
Stacey was a great guest and I really enjoyed talking with him. Thanks gain Stacey - I look forward to meeting you in person someday, Ronnie
Thu, 21 December 2017
Everyone who enters has a chance to win!
$50.00, $100, and $250 Gift Cert for C10 Nation/C10 Talk store
C10 Builders Guide
Aerial Photo of Dino's Git Down
Plus much much more!
Merry Christmas and Happy New Year C10 Nation, Ronnie
Cheers, here's to 2018!!!!
Tue, 12 December 2017
Episode #91 is brought to you by these Rad Ass Sponsors.
Rich Downing and the team from the Chevrolet Specialty Vehicle Program built a 1967 C10 Shortbed Fleetside for their Centennial program and not only is this truck stunning and very tastefully done - it was in the Chevrolet booth and SEMA and we were lucky enough to have Rich sit down with us and talk about this Sweet C10.
I think the best part is Rich is a C10 guy, he has a C10 and he grew up C10 and GM. Thanks Rich, appreciate your time brother, Ronnie
Wed, 29 November 2017
Hell Ya - Git Down 2017 was a HUGE party, a HUGE success!!!
Interview from the Git Down, Episode #90 is brought to you by these Rad Ass Companies - when you are building a truck, you want these companies behind you - their products, their expertise, their support!
www.brotherstrucks.com - Your number 1 source for 1947-87 Chevy and GMC restoration parts.
www.dakotadigital.com - VHX or HDX, these gauge are the upgrade you need!
www.classicperfrom.com - When buying Suspension, Spindles, LS conversions remember use "C10 Talk" at check out and save 10% off your order.
Thu, 16 November 2017
Bonus episode as Joey and his wife drive from Manitoba Canada to the Git Down in a 1972 Chevy Truck.
Roughly 3600 miles roundtrip - DAMN SON.
Wed, 15 November 2017
Episode #89 is brought to you by these RAD ASS Companies!!
David Freiburger the co-host of the successful YouTube show, Roadkill is also a C10 fan and has had plenty. He recently picked up a 1967 Longbed small window 6 banger and has big plans to go really fast with it - like over 200 miles an hour. DAMN SON!!
We also get some breaking news form David about Roadkill - and the future. Enjoy the show and Thanks Dave for sitting down with the C10 Nation, Ronnie.
Mon, 13 November 2017
Updates from Harry Daviess - GoodGuys and the 73-87 Trucks.
Update from John Oro - the C10 Club & Friends Toy Drive!
Update from Chevy Only Dino and the 2017 Git Down!!
Hotels - Courtyard by the Twin Peaks - 602-955-5200
Hampton Inn - 602-956-5221
Midway LS9 Motor raffle - 602-760-3371
Episode #88 is brought to you by these Rad Ass C10 Sponsors.
www.accuair.com - Preorder your CVT now! Ships out Feb. 1, 2018.
www.dakotadigital.com - Upgrade those stock faded gauges.
www.brotherstrucks.com - For all of your C10 restoration needs.
classicperform.com - Use "C10Talk" to save 10% of of your order.
Scott France is the Metal Fabricator at Classic Car Studio Speed Shop in St.Louis, Missouri - He is a C10 guy at heart and also the man behind the builds you see on Velocity's "Speed is the new black!"
Great guy and one hell of a fabricator. Thanks for siting down with the C10 Nation in the MagnaFlow booth at SEMA. Good luck in 2018 my brother, Ronnie.
Wed, 8 November 2017
Episode 87 is brought to you by these Rad Ass C10 Companies.
OK so we knocked out the 22 interviews so If you can get an idea of all the killer builds prior to SEMA and now you can catch up.
-1Roadster shop - 66, wow - this interior
-2Vince Choppin block - cool square - but the coolest thing about this truck was it wasn’t the flashiest C10 but it was built in a week - damn
-3Robby Cartel - had a pretty sweet 64-66 that was wrapped a bunch of time. check it out
-4Tinman 2 Kustoms - had a rat rod set up with a trailer - and a 64-66 long bed in tow
5TMI interior who has had some killer C10’s in there booth for the last few years
6Diesel Bro’s outside
7Orange/White outside -
8ryan Decol from Utah had a nice 67 in the Mothers booth
-9Douglas Interiors - Jeff from Nostaglgia
-10GHOEssT 1967 NOT BLAZER!!
11Brett Oakes - Rad Red Crew Cab Dually
12Western Iowa Green 64-66
13GSI - 66 “reminded” me of Lafawnda
14The Jambulance - Diesel powered 72 Ambulance
15Darin from DWS had a really nice 66
16California Speed and Customs OG paint 73/74 square.
17 1972 that Brandon Sisco buildt - was in the Barrett Jackson booth.
So close to 40 C10 trucks - Yes - I would day we are in the middle of the C10 Movement!! - DAMN SON!!!
So what did I do all damn week - Well Royal Purple said do you want to do interviews?
I was like - hell ya. They said we also want to have a “C10 Nation” day. I was like i like the sound of this. Win/ Win.
So I did interviews for Royal Purple and thought - oh ya - ill knock out interviews after that. Well It was tough. and the video guy had to go edit video. So we just did a few C10 Talk Facebook live videos - they actually have gotten some good traction. So check em out.
I’m not sure if I can pull em off and drop them into YouTube - but that would be cool.
I was also able to do some pod - in the magna flow booth - Ill get those out asap too.
Ok - so SEMA - Monday was pretty chill as we were getting the lay of the land - We shot a few video’s with RP and That was a good get things going day. I liked Monday - as it was chill enought - but all the fellas where either there or rolling in. So we got to help a bunch of guys and see rigs roll in - which is always cool
Tuesday - Opening day - Halloween. Oh man - so many people and trying to be at two differt places at once - because a lot of people do their unveils that day. All in all great day and fun night - I think we all went to the Piano bar that night. I didnt realize it but it was loud and i was probably yell/talking - so that next day my voice was not feeling to good.
Wed - more of the same, I would knock out some interviews and try to get out to see trucks i wanted to see. Man the one truck that had people around it at all times was Craig Piggots - River City Rods - EPIC C30 Camper. From TV people to everyone people - it was a fan fav and a SEMA hit. He had that thing loaded with alcohol - hell ya it was a hit.
Thursday - C10 NATION DAY - the banner, the truck, the shirts, and most importantly the people!!
but we grabbed a quick shuttle and headed south towards Hendo/Boulder for some Off road trophy truck fun - Torq and Tacos
Friday - Run and gun, tried to see as much as I could. I rally wanted to check out as many trucks or even cars that I hadnt seen.
A few other “Damn Son” trucks were Unruly and Duke - they were must see’s on most people’s lists - including mine.
My personal favorites that I actually got around to seeing.
Best motor - Sam Castronova - '79 C-Minus
Best Wheels - Sam Castronova
Best Interior - Jeff from Nostalgia Hot Rods - '67
Best paint - Oscar - Ikandy damn son!!!
Best accesory - Preston had a harley in the truck
My favorites - Camper/GHOEsst/Duke
Non- trucks - the 69 Charger built by BBT Fab
Split Sec Camero - built by Roadster Shop
Twin Turbo Tucker built by Rob_Ida
New Products -
Choppin Block - new
Precisesion Replacement parts re-builds wing windows
speaking of NEW- our SHOP TOUR video is out on You tube.
Git Down -
Motor give away - LS9 - capped to 240 tickets
Wrap up the year and get ready for next year.
I am already working on some killer guest.
If you have someone you really want to hear form let me know.
Farm Truck - Sean “farm truck” whitley
for next year and all these killer SEMA builders - especailly Brandon Cisco - etc...
EAST BOUND AND DOWN!!!!!!!
have a great week.
Tue, 7 November 2017
All C10 Truck's will be allowed into Goodguys! The Goodguys team is going to allow all the 73-87 Squarebody's into GoodGuys this November for the Scottsdale Final.
They are offering a 3 day pass - Friday, Saturday, and Sunday including a GoodGuys Membership for $65.00 - That's a great deal.
You will also be able to sign up at Dino's Git Down on Friday night as well. This means if you can't get registered on Friday, and you don't want to sit in line Saturday you can do it Friday at the Git Down.
Nice Work GoodGuys!
Sun, 29 October 2017
Richard Ruiz - 68 4x4 Blazer
Sam Castronova - 79 C10 C-Minus
Oscar - C10 Fire Shot
Roger Burman - Unruly 1966 C10
Blake Stoner - Savage 49 and 58 Slamio
Fri, 27 October 2017
Episode #85 -s brought to you by -
Three more SEMA builders sit down with Ronnie -
Marc Mullins- @bloodsweatandbeaerd
Craig Piggot - @rivercityrodsia
Todd Carpenter - @bigfishgarage
Thu, 26 October 2017
Episode #84 - More SEMA Pre-Show interviews.
Episode is brought to you by -
This Episode is with -
@c10crew and his 1968 2wd Blazer.
@gregtheegent and his 1970 GMC 2wd shorty
@leftcoastC10 and his 1968 C10 shortbed.
@ctpconcepts and his 1966 Service Truck.
Mon, 23 October 2017
What an ISPIRATION this story is! Jason is building a 1984 C10 for his dad and they both will be going to SEMA with it. They will be in the American Force Booth #45109.
Sat, 21 October 2017
Episode #82 is brought to you by -
SEMA Pre-show interviews -
Jason Bullock - Bullock Body Werks
Tino Garza - Maxbuilt Customs
Jeremy Rice - Tre5 Customs
This guys are kicking ass, and we appreciate their time to sit down with C10 Talk and the C10 Nation.